Автор: uri64
Дата: 05-07-13 15:05
Ако само слага отрязъците филм в държачите и натиска копчето за скан при предварително зададени настройки не е голямо наказание...ама ако седне да си играе какдър по кадър, да калибрира, да прави псевдо - хдр тогава е голяма играчка.
Ето какво казват за тоя модел (той си е връх за плосък скенер, разбира се) от filmscanner.info:
Resolution
The technical specs promise much, but the V750 is not able to hold those promises completely. That shows in the resolution test: despite its "High Pass Optics" - an optical system improved in comparison to the V700 - the V750 does by far not reach the claimed 6400 dpi. To be precise: the resolution test resulted in identical values to the "little brother". The Scan of the USAF Testcharts showed the horizontal lines of the element 5.3 and the vertical lines of the element 5.5 being just about possible to differentiate. According to this we get a resolution of only about 2300 dpi - that's just 40% of the claimed resolution! The sensor of the V750 is able to get the indicated 6400 pixels per inch, however the "High Pass Optics" system of the scanner does not nearly reach the required quality required for capturing with the full resolution. Regarding this, the Epson V750 is also losing against the high-quality film scanners. There are however many favorable film scanners, which do not offer more or offer even less effective resolution.
Density range
Regarding the density range of the Epson Perfection V750 Pro, which is indicated as 4.0, one must say that here it doesn't reach the high-quality film scanners either. Where those still show detail in very dark picture portions, with the V750 everything is black, and very bright portions of the picture are blooming out quicker. More information and explanations to the density range can be found on our special page about density and density-ranges of scanners.
Here however SilverFast can help. The software of course can't increase the density range of the device, but it brings a substantially more homogeneous texture into the dark portions of the picture. I.e. where EpsonScan only presents unclear picture information, SilverFast still produces amazingly much detail.
За среден формат е повече от приличен, за лайка формат според мен никонските скенери са по-добро решение...
Всичко това - лично мнение.
Публикацията е редактирана (05-07-13 15:05)
|
|