Автор: ahab
Дата: 29-01-06 18:22
Като я командваш с тази на тялото или с друга (сб-28, сб-80) която да е мастер върху лентово тяло.
За цифровите трябва да минеш в ръчен режим за да не пускат префлаш (без про-телата д1/2,х/н, д100)
Иска доста четене и експерименти:
To use the SB-50DX' slave feature with a digital SLR camera you have to cripple the camera's flash by setting the camera's flash to the primitive A mode, and the SB-50DX, held in your left hand, to the A slave mode. You have to do this because Nikon's digital SLRs have only a primitive TTL metering system, unlike the film cameras. The digital SLRs have to use a primitive pre-flash, and unfortunately that pre-flash would confuse the slave flash. Thus you have to set the digital SLR's flash into a more primitive non-TTL mode like A for the remote slave to work. I'm unsure how to cripple the built-in flash of the D100 to trigger a remote SB-50, read your manuals. If you forget and don't set the correct mode on your digital SLR's flash you will see the SB-50DX fire just fine, but it will have no effect on your film since the light you see is the response to the pre-flash, but the SB-50DX is not smart enough to follow on with the main flash and thus it does not expose your photo. In other words, the SB-50, when your digital SLR's flash is left in the usual D-TTL mode, is firing before the camera's shutter opens. Just set the flash on your D100 or D1X or whatever to A mode (or M mode if you insist on manual exposure setting) when you want to use the SB-50DX as a remote slave and it works swell.
Отделно от това ще се разориш за ЦР123 батерии...
|
|
![[smilie7]](https://photo-forum.net/forum/smileys/smilie7.gif)
Стани фен на Фото Форум във Facebook
Фото Форум в Instagram